DIY Garden Slat Wall

3.3K Flares Twitter 9 Facebook 22 Google+ 66 Pin It Share 3.2K StumbleUpon 0 3.3K Flares ×
Disclosure: This post is brought to you by 3MDIY.com.
 

If you have been following DDD for a while, you might know that we have been working on our outdoor space this summer. Back in the spring I revealed our DIY Stone Patio and today I’m sharing another big project that we just completed, a DIY Garden Slat Wall. I love it! And it was actually really easy. DIY Garden Slat Wall by @tarynatddd

DIY Garden Slat Wall by @tarynatddd

DIY Garden Slat Wall by @tarynatddd

DIY Garden Slat Wall by @tarynatddd

When we built the stone patio we had to remove a large bush that was (somewhat) hiding the shed in our backyard. Removing the bush allowed us to build a gorgeous patio, but it also left us with a full view of the shed. Quite the eye sore. And then….. I came across this picture on Pinterest and instantly fell in love with how this slat wall was both a beautiful and functional.

This project was actually really easy and could definitely be done in a weekend. It could actually be done in a few hours if you don’t factor in the wait time between steps. It was one of those projects that is super simple and yet makes a really big impact.

Patio Progress via @tarynatddd

Here is a look at our progress on this part of the patio.

If you are intimidated by this, don’t be! I’ve even provided you with a tutorial on how to make your own! There is also a video tutorial at the end.

Supplies Needed:

Slat Wall Supply List

Safety Eye Wear with Cord Control and Ear Plugs : Sanding Valved Respirator : 3M Wood Filler : 3M™ SandBlaster™ Medium Sanding Sheets : ScotchBlue™ Painter’s Tape : 3M Non-Slip Painter’s Tarp2 1/2 ” Exterior Screws : Stain Brush ( Or rag ) :  Staining GlovesEnglish Chestnut Stain : Satin Polyurethane : (11) 1-1/4 x 6 x 8 Cedar Decking : (2) 4 X 4 X 8 Cedar Posts : 50 lb Bag of Quikrete : Leveler : Contractor Pencil : Measuring Tape : Power Drill : Hole Digger Circular Saw

Let’s get started!

DIY Garden Slat Wall Tutorial by @tarynatddd

We started by digging 22″ holes with a hole digger (pictured above). We went down almost two feet to give us a secure base for the structure. This made our fence posts relatively 74″ above the ground, the right amount to cover the top of the shed.

DIY Garden Slat Wall Tutorial by @tarynatddd

The most important part of this step was making sure both posts were completely level. We used a basic leveler to triple check that the posts were not only level on their own vertically, but that they were both the exact same height. We checked the height by placing a board on top of both posts and then placing a level on top.

DIY Garden Slat Wall Tutorial by @tarynatddd

To secure the posts into the ground we used Quikrete, a really easy product that is great for this type of project. You simply pour the concrete sand into the hole and then drench it with water. Then just let it set for 4 hours. That’s it, no mixing or anything. I loved it and our posts are really secure.

DIY Garden Slat Wall Tutorial by @tarynatddd

I am going to stop right here and tell you what we did wrong. Looking back, I would definitely have stained the posts and the boards FIRST before securing them together. I completely underestimated the space behind the wall and the shed and neither of us could fit behind there, so staining became a real tedious project. So if we had to do it again, I would stain all of the wood prior to putting it together and then just touch up once it was complete.

But here is what we did. After the posts set, we were ready to put on the horizontal slats. We chose cedar decking 1-1/4 x 6 x 8 Cedar Decking for this part. The boards actually measure more like 5 1/2″ and we cut them at 82″ long for this project. We needed 11 boards to fill the 74″ fence posts, spacing them at 1/2″ a part. We used (2)  2 1/2 ” Exterior Screws on both ends to secure the boards to the post.

DIY Garden Slat Wall Tutorial by @tarynatddd

Once all of the boards were up, I filled the screw holes with 3M Stainable Wood Filler, allowed it to dry 24 hours, and then used 3M™ SandBlaster™ Medium Sanding Sheets  to smooth out the filler.

DIY Garden Slat Wall Tutorial  by @tarynatddd

Like I mentioned before, staining was a little bit tedious because we had so many nooks and cracks to fill. To protect our patio, I put down a 3M Non-Slip Tarp and then taped off our gutters with ScotchBlue™ Exterior Painter’s Tape. I chose Minwax English Chestnut Stain for the wall, I liked how it was a rich dark color and added a good contrast with our patio. I prefer to apply stain with a rag while wearing gloves, but you can also use a brush if you want. And don’t forget to use your Sanding and Painting Valved Respirator to protect you from the fumes!

After two coats of stain, apply a coat or two of polyurethane to protect your wood. I prefer a satin sheen.

DIY Garden Slat Wall by @tarynatddd

And lastly, I picked up those adorable galvanized planters from Pick Your Plum a while back, 5 for $20! I filled them with soil and some flowers and hung them on the fence.  I also spread black mulch under the wall to really polish off the look.

The total cost for this project came in right around $250, that included lumber, stain, Quickrete, screws, new hole digger and all of the flower pots and gardening supplies. The total cost will vary for everyone depending on what you already have on hand.

And are you ready to check out my very first video tutorial? Ok, so don’t laugh. It turned out way longer than I would have wanted but this gives you some insight into the project and I’m pretty sure this is your first time meeting ‘me’ other than what you get from my posts :)


This post is a collaboration with 3M DIY. To keep up-to-date on projects, products and sampling visit 3MDIY.com To learn more about 3M and their TEKK Protection Gear you can visit them on Facebook, PinterestTwitter

 

3.3K Flares Twitter 9 Facebook 22 Google+ 66 Pin It Share 3.2K StumbleUpon 0 3.3K Flares ×

About 

Taryn is the owner/editor of Design, Dining and Diapers, a lifestyle blog that focuses primarily on DIY home decor, seasonal crafts, easy recipes and just being a mom! She is all about making things for less by upcycling thrift store finds, using what’s on hand and transforming dollar store finds. Taryn lives in the greater Seattle area with her husband, 2 year old daughter and newborn son.

Follow Me

Chalkboard Social Media Icons_Facebook Chalkboard Social Media Icons_Instagram Chalkboard Social Media Icons_Pinterest Chalkboard Social Media Icons_Twitter Chalkboard Social Media Icons_google+ Chalkboard Social Media Icons_Bloglovin Chalkboard Social Media Icons_Email Chalkboard Social Media Icons_YouTube

Comments

  1. Julia @ Cuckoo4Design says

    This is great in so many ways. Especially for people like me who live so close to their neighbors.

  2. says

    I love this Taryn!!!! You have to be the cutest person I have ever seen… haha I love the video!!! You make me want to start doing videos again on my blog. Great job girly!!!! :)

  3. JaneEllen says

    First I’d like to comment on the lovely commentator. You look gorgeous pregnant. Hope you weren’t out there working in terrible heat. I worry about you sometimes girl. Have to take care of that little one and Mama. Can hardly wait to see your new baby, is your little one excited about her new baby?
    I haven’t watched the video yet. I can’t ever hear what people are saying on them and I get bored watching, sorry.
    I love that wall, what a great project, so glad you shared it, love the patio blocks. I had to save that so we could maybe do something like that, I’d love to put up a wall bordering our fence on road side. People/young adults and kids sometimes come along there and love to tease our dog. I’m afraid he’ll bite them as he’s really protective of us.
    You two did a great job on your project. Lots of work but well worth it. Enjoy your summer, just a few weeks now til baby. Happy summer

  4. says

    great project!
    Love the video, you’re so cute pregnant… I mean I think you’re cute always… but hearing you, meeting you, and seeing that little one made me smile Taryn! :)

    pinning!

    gail

  5. says

    Taryn, that is awesome! I love it! I am loving my ‘rusty fence’ project that uses the same idea with the pots of plants. I’m already thinking of putting cute white pumpkins in mine when fall arrrives!

  6. says

    Okay now that I have watched the video- I have to say you are just way too adorable. I wish I had that much style, pep & looked that great when I was expecting. :) Love the video- great job!

  7. says

    It’s gorgeous, Taryn! I’ve pinned and I’m including a link back in this week’s DIY highlights. You make it look so easy! ;) Thanks for sharing!

Trackbacks

  1. […] design your best and most wanted plants on pallet wood wall which you can call diy garden slat wall, let your garden to be furnished in a modern and cool way of modern garden planter decorations, these different garden planter ideas gives not only best way to decorate your garden but also provide you idea about recycling and reuse of old things. source […]

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title="" rel=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>